“ALSEAL” AS-205 High Performance Silicone Sealant has been tested by an ISO/IEC 17025 accredited independent third-party testing lab for the following: The presence of the following ten substances restricted under the Restriction of Hazardous Substances (RoHS 3)(EU Directive 2015/863). Based on the test report: CRSSA/200336368-CA35086, we can conclude that AS-205 is RoHS I & RoHS II compliant.

Evidence Evidence

“ALSEAL” AS-205 High Performance Silicone Sealant has been tested by an independent third party testing lab according to the 21 CFR 175.300 - Resinous and polymeric coatings. This is a regulation covering most types of adhesives and coatings used on food-contact surfaces. Said regulation also covers certain specific polymers, pigments, additives and the maximum percentage of certain materials in a formulation. It should also be known that FDA does not approve or endorse any coatings or adhesive to be used for food-contact surfaces. The coating or adhesive to be used for these surfaces shall be tested according to the testing conditions specified in 21 CFR 175.300.

Evidence Evidence

This letter is to elaborate on AS-205 High-Performance Silicone Sealant contributing to Leadership in Energy and Environmental Design (LEED) v4.1 credit. The EQ Credit: Low- Emitting Materials requires 75 % of adhesives and sealants to meet the volatile organic compound (VOC) emissions evaluation and 100 % of adhesives and sealants to meet the VOC content evaluation. For VOC emissions, the product is to be tested as per the California Department of Public Health (CDPH) Standard Method v1.2-2017. The product must comply with the VOC allowable concentration listed in Table 4-1 of the standard method. The total VOC (TVOC) after 14 days is required to be reported in ranges as specified in the standard method.

Evidence Evidence